Centrifugal scraper film evaporator
This machine is an evaporator that uses high-speed rotation to distribute liquid into a uniform thin film and performs evaporation or distillation in a vacuum state. It consists of one or more heating cylinders with jackets and a high-speed rotating film scraping mechanism inside the cylinder. The scraping mechanism continuously scrapes the liquid onto the wall of the heating cylinder to form a uniformly thick liquid film and moves downwards. At the same time, the low boiling point components rise, evaporate, and separate, and the concentrated liquid is discharged from the bottom of the evaporator.
Evaporator for high concentration and high salt wastewater
Jinling Company independently develops and designs various specialized evaporation and solidification devices to adapt to different concentrated liquid treatments. High concentration and high salt organic wastewater is a type of wastewater formed during chemical production, garbage infiltration, or reverse osmosis processes, which is extremely difficult to treat. Its COD30000-1000000mg/L and salt concentration of 5% -25% (50000ppm-150000ppm) are currently difficult to treat wastewater. Its ultra-high organic matter concentration and Ca2+, Mg2+, Si4+concentration make it difficult for conventional multi effect evaporators and MVR processes to operate for a long period of time due to scaling and other factors. Even liquid incineration systems are prone to pipeline blockage and severe corrosion due to their high salt content.
After being filtered and heated, the air enters the hot air distributor at the top of the dryer, and the hot air enters the drying chamber uniformly in a spiral shape. The feed liquid is pumped to the high-speed centrifugal atomizer at the top of the tower, where it is atomized into extremely fine mist droplets. When it comes into contact with hot air, the moisture evaporates rapidly in a very short time. The finished product is continuously collected by the dust collector at the bottom of the drying tower, and the exhaust gas is discharged by the fan for further treatment.
Waste liquid special scraper dryer
Suitable for solidification of waste liquids or viscous materials in industries such as chemical, dye, pharmaceutical, food, metallurgy, etc.
Dedicated drying treatment system for waste salt
Jinling Drying Machinery has independent development, design, and printing machine capabilities, and is a professional manufacturer of precision machining and testing equipment
The equipment takes advantage of the principle that the boiling point of ethanol is lower than the boilig point of waterand its solution, to distill the recycled ethanol solution with the heating temperature that is slightly higher the boilingpoint of ethanol.The vapor of concentrated ethanol will be generated after treated by the distillation tower, and it can berecycled once cooled by the condenser. Eventually, the alcohol with the concentration that meets the requirement will bemade. This equipment has five main parts.Other accessories may apply if necessary.
This machine is used across pharmaceutical industry. chemical industry,food industry. and light engineeringindustry for the production processes such as hydrolysis,neutralization, crystallization, distillation and evaporation.There are different mixing mechanisms,including anchor mixing, frame mixing, and paddle mixing. The sealingmechanism is usually mechanical sealing. Different structures can be used for heating and cooling, such as jacket,semi-tube, and coil. Heating methods can be steam, electricity, or thermal oil, depending on the working conditionsand requirements for processing such as resistance for acid and alkali, high temperature,wear and tear, andcorrosion.This machine can be custom made to meet the specific requirements of our clients.
This equipment is designed for mixing and fermenting the raw materials. It has the internalcirculation structure.Foams will be dispersed and broken through the mixing process. Inside thetank, asepsis respiration system or asepsis fermentation system with compression is installed.The tank body is not covered with jacket.Circulation of heating and cooling will be accomplishedthrough the heating and cooling applied to the media.
TQ Multifunctional Extracting Tank
This cquipment can be used across traditional Chinese medicineindustry. food industry. chemical industry under operating conditionssuch as atmospheric pressure.micro-pressure.water decoction， warmdipping, hot reflux,forced circulation，percolation, extraction of aromaticoil, and recovery of organic solvents.
This series of equipment is mainly composed of five parts: the main body of theevaporation tank, the condenser, the vapor-liquid separator, the cooler, and the receiver.Evaporation tank has a jacket heating structure, and the cooler has a coil structure. Thistype of machine can be used across pharmaceutical industry.food industry,chemicalindustry， and other industries for the concentration of liquids. It can also be used forrecycling alcohol and simple reflux extraction.
DZ Molecular Distillation Equipment
Molecular distillation, also called short-path distillation, is mainly used for the gentle separationof materials with high heat sensitivity or high boiling point. lt is widely used for deodorization,purification， concentration and other processes across petrochemical industry, fine chemicalindustry. pharmaceutical industry, pesticide industry, food industry, oil industry, and environmentalprotection industry.
Centrifugal Scraper Thin-film Evaporator
This machine uses high-speed rotation to distribute the liquid into auniform film. It is an evaporator for evaporation or distillation under vacuumconditions. It consists of one or more jacketed heating cylinders and the filmscraping device inside the cylinders with high rotation speed.The film scrapingdevice continuously scrapes the liquid on the wall of the heating cylinder intoa thick and uniform liquid film which moves downward.At the same time, thecomponents with low boiling point rise and evaporate and it will be separated,concentrated, and then discharged from the bottom of the evaporator.
SJM Multi-Effect Falling Film Evaporator
The material liquid is added to the upper part of the heater of the falling filmevaporator through the feeding pump, and after being evenly distributed by the filmdistribution device, it flows evenly downward in the form of liquid film along the innerwall of the heat exchanger tube. The water evaporates Quickly, and the vapor-liquid is fully separated by the separating device.After the secondary steam is condensed,the residualheat can enter the previous system or the following system to continue heating, and the liquid phase is discharged from the separation chamber. This equipment can also be usedin combination with multi-effect, forced circulation, MVR and other evaporators.
The multi-effect evaporation eouipment uses new steam for heating during the single effect. The secondary steamgenerated is reused for the double effect.This step will be repeated for further use of thermal energy. The feed liouidis concentrated during the multi-stage heating and evaporation process,which reduces the operating cost at the same time.
Our company uses the multi-effect energy-saving principles andtechnologies, combined with the membrane pre-treatment in the earlierstep and the drying in the later step, to build the integrated processingeouipment of evaporation. concentration, and solidification. Thecompany has the core technology with independent intellectual propertyrights. We can also provide different treatment methods depending onthe characteristics of the wastewater.
Vacuum Paddle Dryer (Mechanical Seal)
jinling is a professional manufacturer of vacuum paddle dryers. This model is the thrd- generation product designed and upgraded by our company.
Vacuum Paddle Dryer (Packing Seal)
The processing technique called “"six points on one line" is applied, combined with three sets of bearing structure design to improve concentricity and adjustment for thermal expansion
Jinling is a professional manufacturer of vacuum paddle dryers in China. This model has a simple structure. which is adopted from the first generation of domestic products. It is mainly used for the drying or cooling of the powder and granular materials that do not require a sealed environment. The machine is supported by a bearing structure at both ends. Two sets of bearing and Haval bearing seats are used in this case. Packing seal is generally applied. The reducer is side mounted or direct- connected. The design of the mixing shaft and the main body is farly simple.
Jinling is a professional manufacturer of paddle dryer. The paddle dryer with the wedge structure is one of the first traditional dryers in China. It is a low speed mixing dryer that uses heat conduction. The drying barrel is equipped with a jacket. The hollow shaft is equipped with a hollow paddle, wherea heat transfer medium can flow through. The wet material can exchange heat with the barrel and the hot surface of the paddle through the agitation of the mixing paddle, so that the wet material can be dried eventually. Generally, the structure can be horizontal, double shaft or Quadruple shaft.
A variety of structures are designed by our company for the vacuum paddle dryer, which have been applied and produced in large Quantities. The stability, eficiency and strength of the machine has been significantly improved. Speially, the paddle dryer with high vacuum level has acquired the national invention patent;
Our company conducted an independent research on the single screw mixing structure with high vacuum level, and we developed and produced the machine accordingly in 2008
The pressurized spray dryer uses a pressurized atomizer to atomize the solution or the slurry material into fine droplets with the pressure produced by the pressure pump, which significantly increases thesurface area of the material. After the sufficient heat exchange with the hot air, the material can be driedrapidly (between ten seconds and a hundred seconds), so that the products can be powdery or fine particles.
The extract spray dryer is mainly used for drying products with low melting point and high sugar content. It can be equipped with air dehumidifier, automatic cleaning device, air filtration system, cold wall system, windfilm system, exhaust gas treatment system and other devices. The machine has a high level of automation and the operation of this machine is very easy. This machine is generally made of stainless steel and it meets the reQuirements of "GMP".
Markets
Case
Service
Technical Support
Adhere to customer-centric approach and respond quickly to customer needs. Persist in creating long-term value for customers and helping them achieve success.
DO YOU HAVE QUESTIONS?
We will contact you within one working day. Please pay attention to your email.
CONTACT US
Address
501 Changhe Road, Zhenglu Town, Changzhou City, Jiangsu Province, China (ZIP Code: 213115)