Jinling as an innovation-oriented enterprise specialized in advanced technology.We have over 20 years of experience in machine manufacturing.
The MVR mechanical steam recompression device uses the secondary steam generated in the evaporation system to do work through a compressor, increasing steam pressure and enthalpy, circulating for heating and evaporation, fully utilizing the waste heat of the secondary steam engine condensate in the system, and achieving outstanding energy-saving effects. In addition to using fresh steam and waste heat raw material steam for driving, there is no need to use additional steam. The purpose of evaporation concentration is achieved through the self circulation of the evaporator, which can save 70-90% of energy consumption. The system consists of a preheater, evaporative heat exchanger, separator, and steam compressor.
Multi effect evaporation concentrator
The multi effect evaporation device utilizes new steam to heat the first effect, and the generated secondary steam enters the second effect for further heating and utilization, reusing this principle to further utilize thermal energy. The material liquid is heated and evaporated in multiple stages on the tube side for concentration, thereby reducing operating costs.
Multi effect falling film evaporator
The feed liquid is added to the upper part of the heater of the falling film evaporator through the feeding pump, evenly distributed by the film distribution device, and flows downward in a film like manner along the inner wall of the heat exchanger shell. The water evaporates rapidly, and the vapor and liquid are fully separated by the separation device. After condensation, the residual heat of the secondary steam can enter the rear or front channel for further heating, and the liquid phase is discharged from the separation chamber. It can also be used in combination with multi effect, forced circulation, MVR, solidification and other evaporators.
Mainly applicable to industries such as chemical, food, pharmaceutical, environmental protection, and waste liquid evaporation and recovery, it is a structurally, crystalline, high concentration, high viscosity, and insoluble solid evaporation and concentration method.
The evaporator is composed of a coaxial twin tube structure, which is connected by a central downcomer. The bottom structure (retention chamber or growth chamber) provides the necessary space and fluidization characteristics for crystal growth and suppression of supersaturation. Due to the control of crystal growth by the growth type crystallizer, the generated salt crystals can be classified according to particle size, and the classified salt crystals form a fluidized bed, suppressing the generation of supersaturation. The circulation of materials from the growth chamber to the heating chamber is achieved through an external pump.
This evaporative crystallizer is a continuous crystallizer with a flow tube and baffle for circulating crystal slurry. The system consists of a heating chamber, an evaporation crystallization chamber, a circulation pump, a vertical axial flow pump, a crystallization zone, an evaporation zone, and a mother liquor zone (baffle). The crystal particle size is around 0.2-1.2mm, with uniform particles and a smooth surface. Different products have different crystal characteristics, but within a certain range, the particle size can be adjusted, which is the characteristic of DTB crystallizer.
Centrifugal scraper film evaporator
This machine is an evaporator that uses high-speed rotation to distribute liquid into a uniform thin film and performs evaporation or distillation in a vacuum state. It consists of one or more heating cylinders with jackets and a high-speed rotating film scraping mechanism inside the cylinder. The scraping mechanism continuously scrapes the liquid onto the wall of the heating cylinder to form a uniformly thick liquid film and moves downwards. At the same time, the low boiling point components rise, evaporate, and separate, and the concentrated liquid is discharged from the bottom of the evaporator.
Evaporator for high concentration and high salt wastewater
Jinling Company independently develops and designs various specialized evaporation and solidification devices to adapt to different concentrated liquid treatments. High concentration and high salt organic wastewater is a type of wastewater formed during chemical production, garbage infiltration, or reverse osmosis processes, which is extremely difficult to treat. Its COD30000-1000000mg/L and salt concentration of 5% -25% (50000ppm-150000ppm) are currently difficult to treat wastewater. Its ultra-high organic matter concentration and Ca2+, Mg2+, Si4+concentration make it difficult for conventional multi effect evaporators and MVR processes to operate for a long period of time due to scaling and other factors. Even liquid incineration systems are prone to pipeline blockage and severe corrosion due to their high salt content.
After being filtered and heated, the air enters the hot air distributor at the top of the dryer, and the hot air enters the drying chamber uniformly in a spiral shape. The feed liquid is pumped to the high-speed centrifugal atomizer at the top of the tower, where it is atomized into extremely fine mist droplets. When it comes into contact with hot air, the moisture evaporates rapidly in a very short time. The finished product is continuously collected by the dust collector at the bottom of the drying tower, and the exhaust gas is discharged by the fan for further treatment.
Waste liquid special scraper dryer
Suitable for solidification of waste liquids or viscous materials in industries such as chemical, dye, pharmaceutical, food, metallurgy, etc.
Dedicated drying treatment system for waste salt
Jinling Drying Machinery has independent development, design, and printing machine capabilities, and is a professional manufacturer of precision machining and testing equipment
The equipment takes advantage of the principle that the boiling point of ethanol is lower than the boilig point of waterand its solution, to distill the recycled ethanol solution with the heating temperature that is slightly higher the boilingpoint of ethanol.The vapor of concentrated ethanol will be generated after treated by the distillation tower, and it can berecycled once cooled by the condenser. Eventually, the alcohol with the concentration that meets the requirement will bemade. This equipment has five main parts.Other accessories may apply if necessary.
This machine is used across pharmaceutical industry. chemical industry,food industry. and light engineeringindustry for the production processes such as hydrolysis,neutralization, crystallization, distillation and evaporation.There are different mixing mechanisms,including anchor mixing, frame mixing, and paddle mixing. The sealingmechanism is usually mechanical sealing. Different structures can be used for heating and cooling, such as jacket,semi-tube, and coil. Heating methods can be steam, electricity, or thermal oil, depending on the working conditionsand requirements for processing such as resistance for acid and alkali, high temperature,wear and tear, andcorrosion.This machine can be custom made to meet the specific requirements of our clients.
This equipment is designed for mixing and fermenting the raw materials. It has the internalcirculation structure.Foams will be dispersed and broken through the mixing process. Inside thetank, asepsis respiration system or asepsis fermentation system with compression is installed.The tank body is not covered with jacket.Circulation of heating and cooling will be accomplishedthrough the heating and cooling applied to the media.
TQ Multifunctional Extracting Tank
This cquipment can be used across traditional Chinese medicineindustry. food industry. chemical industry under operating conditionssuch as atmospheric pressure.micro-pressure.water decoction， warmdipping, hot reflux,forced circulation，percolation, extraction of aromaticoil, and recovery of organic solvents.
This series of equipment is mainly composed of five parts: the main body of theevaporation tank, the condenser, the vapor-liquid separator, the cooler, and the receiver.Evaporation tank has a jacket heating structure, and the cooler has a coil structure. Thistype of machine can be used across pharmaceutical industry.food industry,chemicalindustry， and other industries for the concentration of liquids. It can also be used forrecycling alcohol and simple reflux extraction.
DZ Molecular Distillation Equipment
Molecular distillation, also called short-path distillation, is mainly used for the gentle separationof materials with high heat sensitivity or high boiling point. lt is widely used for deodorization,purification， concentration and other processes across petrochemical industry, fine chemicalindustry. pharmaceutical industry, pesticide industry, food industry, oil industry, and environmentalprotection industry.
Markets
Service
Technical Support
Adhere to customer-centric approach and respond quickly to customer needs. Persist in creating long-term value for customers and helping them achieve success.
DO YOU HAVE QUESTIONS?
We will contact you within one working day. Please pay attention to your email.
CONTACT US
Address
501 Changhe Road, Zhenglu Town, Changzhou City, Jiangsu Province, China (ZIP Code: 213115)