JINLING DRYING

Designing and Manufacturing of Pressure Vessel

Designing and Manufacturing of Pressure Vessel

JH Ethanol Distiller

The equipment takes advantage of the principle that the boiling point of ethanol is lower than the boilig point of waterand its solution, to distill the recycled ethanol solution with the heating temperature that is slightly higher the boilingpoint of ethanol.The vapor of concentrated ethanol will be generated after treated by the distillation tower, and it can berecycled once cooled by the condenser. Eventually, the alcohol with the concentration that meets the requirement will bemade. This equipment has five main parts.Other accessories may apply if necessary.

FYG Reaction Tank

This machine is used across pharmaceutical industry. chemical industry,food industry. and light engineeringindustry for the production processes such as hydrolysis,neutralization, crystallization, distillation and evaporation.There are different mixing mechanisms,including anchor mixing, frame mixing, and paddle mixing. The sealingmechanism is usually mechanical sealing. Different structures can be used for heating and cooling, such as jacket,semi-tube, and coil. Heating methods can be steam, electricity, or thermal oil, depending on the working conditionsand requirements for processing such as resistance for acid and alkali, high temperature,wear and tear, andcorrosion.This machine can be custom made to meet the specific requirements of our clients.

FXG Fermentation Tank

This equipment is designed for mixing and fermenting the raw materials. It has the internalcirculation structure.Foams will be dispersed and broken through the mixing process. Inside thetank, asepsis respiration system or asepsis fermentation system with compression is installed.The tank body is not covered with jacket.Circulation of heating and cooling will be accomplishedthrough the heating and cooling applied to the media.

TQ Multifunctional Extracting Tank

This cquipment can be used across traditional Chinese medicineindustry. food industry. chemical industry under operating conditionssuch as atmospheric pressure.micro-pressure.water decoction， warmdipping, hot reflux,forced circulation，percolation, extraction of aromaticoil, and recovery of organic solvents.

JN Vacuum Evaporator

This series of equipment is mainly composed of five parts: the main body of theevaporation tank, the condenser, the vapor-liquid separator, the cooler, and the receiver.Evaporation tank has a jacket heating structure, and the cooler has a coil structure. Thistype of machine can be used across pharmaceutical industry.food industry,chemicalindustry， and other industries for the concentration of liquids. It can also be used forrecycling alcohol and simple reflux extraction.

DZ Molecular Distillation Equipment

Molecular distillation, also called short-path distillation, is mainly used for the gentle separationof materials with high heat sensitivity or high boiling point. lt is widely used for deodorization,purification， concentration and other processes across petrochemical industry, fine chemicalindustry. pharmaceutical industry, pesticide industry, food industry, oil industry, and environmentalprotection industry.

Centrifugal Scraper Thin-film Evaporator

This machine uses high-speed rotation to distribute the liquid into auniform film. It is an evaporator for evaporation or distillation under vacuumconditions. It consists of one or more jacketed heating cylinders and the filmscraping device inside the cylinders with high rotation speed.The film scrapingdevice continuously scrapes the liquid on the wall of the heating cylinder intoa thick and uniform liquid film which moves downward.At the same time, thecomponents with low boiling point rise and evaporate and it will be separated,concentrated, and then discharged from the bottom of the evaporator.

SJM Multi-Effect Falling Film Evaporator

The material liquid is added to the upper part of the heater of the falling filmevaporator through the feeding pump, and after being evenly distributed by the filmdistribution device, it flows evenly downward in the form of liquid film along the innerwall of the heat exchanger tube. The water evaporates Quickly, and the vapor-liquid is fully separated by the separating device.After the secondary steam is condensed,the residualheat can enter the previous system or the following system to continue heating, and the liquid phase is discharged from the separation chamber. This equipment can also be usedin combination with multi-effect, forced circulation, MVR and other evaporators.

SZ Multi-Effect Evaporator

The multi-effect evaporation eouipment uses new steam for heating during the single effect. The secondary steamgenerated is reused for the double effect.This step will be repeated for further use of thermal energy. The feed liouidis concentrated during the multi-stage heating and evaporation process,which reduces the operating cost at the same time.

MVR Evaporator (Crystallizer)

Our company uses the multi-effect energy-saving principles andtechnologies, combined with the membrane pre-treatment in the earlierstep and the drying in the later step, to build the integrated processingeouipment of evaporation. concentration, and solidification. Thecompany has the core technology with independent intellectual propertyrights. We can also provide different treatment methods depending onthe characteristics of the wastewater.