JINLING DRYING

Jinling Company is a professional manufacturer of blade drying machines. The wedge-shaped blade drying machine is the first generation of traditional products in China and is a low-speed stirring drying machine with conduction heating. A jacket is installed on the dryer cylinder, and a hollow blade is installed on the hollow shaft. A heat carrier is introduced into it, and the wet material is fully heat and mass transferred with the hot surface of the cylinder and blade under the stirring of the stirring blade, in order to achieve the purpose of drying. The structural form is generally horizontal, double axis or four axis.

This product is the second-generation disc blade sludge dryer independently developed and designed by our company, with different forms such as disc, semi disc, and spiral structure. By using an embedded stirring structure with two hollow shaft arranged heating disks, wet sludge is forcibly sheared, crushed, and dispersed. Scrapers at different angles are set on the periphery of each disk to provide self-cleaning function on the heat transfer surface (molded structure), fully improving heat and mass transfer and efficiency. Using steam or thermal oil as a heat source, it is directly introduced into the shaft, disc, and cylinder jacket, causing the moisture in the sludge to evaporate on the contact surface due to heating. At the same time, the gradient pushes the moisture in the sludge to transfer from the contact surface to the air and release it onto the sludge surface, thereby achieving the purpose of drying. The maximum daily processing capacity of a single drying machine is ≤ 150t (80%).

Mainly used in chemical raw materials, pesticides, chemical sludge, etc. Specially designed for the drying treatment of oily sludge and coal chemical sludge, it is currently a substitute for imported equipment and one of the systems with high safety and stability in the sludge drying process.

Mainly targeting sludge with high corrosiveness and low water treatment requirements; High temperature waste heat or exhaust gas can be used as a carrier; The treatment of block shaped sludge with complex composition, high impurities, and large hard spots.