JINLING DRYING

This machine is an evaporator that uses high-speed rotation to distribute liquid into a uniform thin film and performs evaporation or distillation in a vacuum state. It consists of one or more heating cylinders with jackets and a high-speed rotating film scraping mechanism inside the cylinder. The scraping mechanism continuously scrapes the liquid onto the wall of the heating cylinder to form a uniformly thick liquid film and moves downwards. At the same time, the low boiling point components rise, evaporate, and separate, and the concentrated liquid is discharged from the bottom of the evaporator.

Jinling Company independently develops and designs various specialized evaporation and solidification devices to adapt to different concentrated liquid treatments. High concentration and high salt organic wastewater is a type of wastewater formed during chemical production, garbage infiltration, or reverse osmosis processes, which is extremely difficult to treat. Its COD30000-1000000mg/L and salt concentration of 5% -25% (50000ppm-150000ppm) are currently difficult to treat wastewater. Its ultra-high organic matter concentration and Ca2+, Mg2+, Si4+concentration make it difficult for conventional multi effect evaporators and MVR processes to operate for a long period of time due to scaling and other factors. Even liquid incineration systems are prone to pipeline blockage and severe corrosion due to their high salt content.

After being filtered and heated, the air enters the hot air distributor at the top of the dryer, and the hot air enters the drying chamber uniformly in a spiral shape. The feed liquid is pumped to the high-speed centrifugal atomizer at the top of the tower, where it is atomized into extremely fine mist droplets. When it comes into contact with hot air, the moisture evaporates rapidly in a very short time. The finished product is continuously collected by the dust collector at the bottom of the drying tower, and the exhaust gas is discharged by the fan for further treatment.

Suitable for solidification of waste liquids or viscous materials in industries such as chemical, dye, pharmaceutical, food, metallurgy, etc.